Ø Memorisation: the most recent parameters applied are memorised. This is particularly helpful for mass cutting, or for cutting identical workpieces.
Ø Automatic regulation: an electronic device measuring the effort of the various motors regulates the forward motion of the working table during automatic cycles. Maximum and minimum thresholds may be easily configured by the operator to adapt the parameters on the basis of the types of workpieces and materials. It is also possible to configure response time for adjustment.
Ø Pulsation cutting: the MECATOME T 300 has 2 cutting modes: direct or with pulse cutting system. With the direct mode, automatic forward motion is continuous, and only speed is regulated if necessary. With the pulse system mode, forward motion is alternated with stops for optimum cooling of the workpiece. Forward motion and stopping time may be configured separately per 1/10th of a second. Forward motion speed may be regulated.
Ø Frequency inverter: "inverter" technology. This unit controls the three-phase motors. The following functions are used on the MECATOME T 300: speed regulator, constant torque and speed independently to load, progressive acceleration and immediate stop, overload safety device and feedback for a steady forward motion according to effort.
Ø Filtering: new generation filters have been developed for the MECATOME T 300 in order to improve the quality of cutting, but importantly to simplify user tasks such as cleaning the machine or draining the cooling tray. The cooling tray only contains cooling water, and the liquid is clear and practically free of deposits and cutting waste. Draining is simple and infrequent.
Ø Safety locking: in application of safety standards, interlocking prevents the cover from opening during the cutting cycle when the disk is rotating.
